| |
Radiant Warmer Servo Control with 2 Disply |
|
| |
Mechanical Specifications |
|
| |
- Main Cabinet Fabricated in Mild Steel.
- Cabinet Painted with Epoxy Powder Coated.
- Baby Tray with mattress along with detachable side support.
- I.V.Stand provides for Administration in Drips etc.
- Imported Silicon Quartz Heater of special quality is provided along with S.S.Reflector.
- Rigid four number castor wheels provided.
- Head up and down facility.
- Earthing chain provided.
- Examination Light provided.
- Bottom Cabinet with single drawer type.
|
|
|
- Servocontrolled.
- Set Temperature Range 25°c to 39°c.
- Set Temperature variable form knob.
- Two Digital Display indicated Air/Baby Temperature on same display, required (set) temperature on other display.
- Baby Probe provided.
- System for indicate Audio Visual.
- Heater Shuts off in case of any fault, built on full fill safe principle.
- Independent Programmable Hi-Temperature Cut-off is provided.
- Temperature variation from Head to Foot ±1°c.
- Heater power out put show LED.
- Temperature Accuracy ±1°c.
- Control Accuracy ±1°c.
- Baby Skin and Air Temperature can be selected switch.
|
| |
- Air Sensor Failure.
- Baby Sensor Failure.
- Power Failure.
- Over Heat.
|
|
| |
- When baby Temperature exceeds 39 °c.
- When Air Temperature exceeds 39 °c.
|
|
| |
Power Source - 230 ±10 V . 50 Hz |
|
| |
Power Consumption - 1000 Watts |
|
